Table of Contents
Advertisement
Interface
Factory Reset
LAN1/2 (Giga)
WAN1/2/3/4
(Giga)
USB1/2
Vigor300B Quick Start Guide
Description
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecters for local networked devices.
Connecters for remote networked devices.
Connecter for Mobile HDD, 3G Modem or printer.
Connecter for a power cord.
ON/OFF - Power switch.
4
Advertisement
Table of Contents
