Table of Contents
Advertisement
ef
EDS7001F MILANO
If the stove was operating prior to servicing allow at least 10 minutes for light
bulbs and heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the
risk of electric shock or damage to persons.
TO REPLACE HEATER THERMOSTAT
1. Remove the stove pipe kit (if equipped).
2. Unscrew the two black knobs on the front of the unit by turning
counterclockwise.
3. Grasp onto the front door, gently lift up and pull the door off of the unit.
4. Remove the upper light bracket mounting screws from the top and remove
the light bracket assembly from the unit.
5. Locate the four cam locks on the side panels inside the upper corners of
the stove and turn with a large slot screwdriver so the triangle on the cam
lock is pointing up towards the top of the stove.
6. Grasp the top at both sides and gently pull to release the top.
7. Locate the heater thermostat mounted on the rear panel and disconnect
the wiring clips and connections noting their original locations.
8. Pull off the thermostat control knob to expose the mounting screws.
9. Remove the mounting screws and remove the heater thermostat.
10. Properly orientate the new heater thermostat and connect all of the wiring
clips and connections.
11. Reassembly in the reverse order as above.
13
Advertisement
Table of Contents
