Maintenance; Light Bulb Replacement - Dimplex DS3311 Owner's Manual

CAUTION: If you need to continuously reset the heater, unplug
the unit and call Dimplex North America Limited at
1-888-346-7539.

Maintenance

WARNING: Disconnect power before attempting any maintenance
or cleaning to reduce the risk of fire, electric shock or damage to
persons.

Light Bulb Replacement

Allow at least five (5) minutes for light bulbs and heater to cool off
before touching bulbs to avoid accidental burning of skin.
Light bulbs need to be replaced when you notice a dark section of
the flame or when the clarity and detail of the log exterior disappears.
There are two (2) bulbs under the log set which generate the flames
and embers.
Light Bulb Requirements
Quantity of two (2) clear chandelier or candelabra bulbs with an E-12
(small) socket base, 25 Watt rating.
Helpful Hints
It is a good idea to replace all light bulbs at one time if they are close to
the end of their rated life. Group replacement will reduce the number
of times you need to open the unit to replace light bulbs.
Replacement:
1. Open the front door.
2. Remove the four screws located on the ember bed and remove the
log set (Figure 2).
3. Locate and examine the bulbs to determine which bulb(s) required
replacement.
4. Unscrew the bulb(s) counter clockwise.
5. Insert new bulb(s).
6. Install the log set into the unit. Replace the log set retaining screws
into the ember bed.
5