Heater Installation - Dimplex CUH05B31T Owner's Manual

IMPORTANT INSTRUCTIONS
required.
⑮
Disconnect all power supplies
before performing any cleaning,
maintenance or relocation of the
heater.
SAVE THESE INSTRUCTIONS

Heater Installation

HEATER LOCATION AND
CLEARANCES
The heater is to be installed in a fixed
location. The discharge air should
wipe the walls without blowing directly
on them. (FIGURE 1)
Ensure the air discharge is parallel to
or away from walls.
!
NOTE:
To prevent personal
injury always use a licensed
electrician to install new outlets or
circuits.
CAUTION:
or tilting the heater do not block the
exhaust opening.
INSTALLATION WALL/CEILINg
HANgER BRACKET (FIGURE 2)
!
NOTE: To prevent personal injury
always use a licensed electrician to
install new outlets or circuits.
The hanger bracket allows the unit to
be rotated approx 45 degrees in each
When turning and/
⑯
When transporting or storing the
heater, keep in a dry place, free from
excessive vibration and store so as to
avoid damage.
5