Table of Contents
Advertisement
An overload protection is deployed if one of the
seats is blocked. If this happens, turn off the
ignition and wait a short time before adjusting
the seat again. Only one of the seat's settings
can be adjusted at a time.
Memory function
Buttons for memory function.
Store setting
1. Adjust the seat and the door mirrors.
2. Press and hold button M while pressing
button 1, 2 or 3 simultaneously.
Using a stored setting
Press one of the memory buttons 1–3 until the
seat and the door mirrors stop. If you release
the button then the movement of the seat will
stop.
Emergency stop
If the seat accidentally begins to move, press
any of the buttons to stop the function.
WARNING
Risk of crushing. Make sure that children do
not play with the controls.
Check that there are no objects in front of,
behind or under the seat during adjustment.
Ensure that none of the rear seat passen-
gers is in danger of becoming trapped.
Memory in remote control key
The positions of the driver's seat and the door
mirrors are stored in the memory for the remote
control key with which the car is locked. When
the car is unlocked with the same remote con-
trol key the driver's seat and the door mirrors
adopt the stored positions when the driver's
door is opened.
NOTE
The remote control key memory is inde-
pendent of seat memory.
04 Interior
Front seats
Entry to rear seat, manual seat
Handle for lowering the backrest
Button for moving the power seat longitu-
dinally
NOTE
No one may sit in the seat when it is pushed
forward for entry into the rear seat.
NOTE
Lower the seat before it is pushed forward -
otherwise there is a risk that the head
restraint makes contact with the sun visor.
04
``
99
Advertisement
Table of Contents
