Table of Contents
Advertisement
09 Maintenance and service
Replacing bulbs
09
Vanity mirror lighting*
Removing the mirror glass
1. Insert a screwdriver underneath the lower
edge, in the centre. Carefully prize up the
lug on the edge.
2. Insert the screwdriver underneath the edge
on the left and right-hand sides (by the
black rubber sections), and prize carefully
so that the glass comes loose in the lower
edge.
3. Carefully detach and lift aside the entire
mirror glass and cover.
4. Remove the blown bulb and replace it with
a new one.
*
228
Option/accessory, for more information, see Introduction.
Fitting the mirror glass
1. First, press the three lugs at top edge of
mirror glass back into position.
2. Then press the three lower lugs back into
position.
Interior lighting, rear
1. Insert a screwdriver and gently turn so that
the lamp housing comes loose.
2. Remove the blown bulb.
3. Fit a new bulb.
Advertisement
Table of Contents
