Table of Contents
Advertisement
IMPORTANT
The ground must be firm, smooth and level.
7. Lift the car so that the wheel is free.
Remove the wheel nuts and lift off the
wheel.
Fitting the wheel
1. Clean the contact surfaces between wheel
and hub.
2. Put on the wheel. Tighten the wheel nuts.
3. Lower the car so that the wheel cannot
rotate.
4. Tighten the wheel nuts crosswise. It is
important that the wheel nuts are tightened
properly.
•
Standard wheel nuts - tightening tor-
que: 110 Nm
•
Domed wheel nuts - tightening torque:
130 Nm
Check the torque with a torque wrench.
5. Put on the wheel cover (steel rim).
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack.
Ensure that passengers wait with the car -
or preferably a crash barrier - between them
and the road.
07 Wheels and tyres
Changing wheels
07
195
Advertisement
Table of Contents
