Table of Contents
Advertisement
02 Instruments and controls
Indicator and warning symbols
Functionality check, symbols
All indicator and warning symbols
02
when the remote control key is turned to posi-
tion II before starting. This is to check that the
symbols are working. When the engine starts,
all the symbols should go out except the hand-
brake symbol, which only goes out when the
brake is disengaged.
If the engine does not start within
five seconds, all symbols extin-
guish except the symbols for a
fault in the car's emissions system
and for low oil pressure. Certain
symbols may have no function,
depending on the car's specifica-
tions.
1
For certain engine variants, the symbol for low oil pressure is not used. Warnings are given via display text, see page 56.
52
Symbols in the centre of the instrument
panel
1
illuminate
The red warning symbol illumi-
nates when a fault has been indi-
cated which could affect the safety
and/or driveability of the car. An
explanatory text is shown on the
information display at the same time. The sym-
bol remains visible until the fault has been rec-
tified but the text message can be cleared with
the READ button, see page 56. The warning
symbol can also illuminate in conjunction with
other symbols.
When the symbol illuminates:
1. Stop in a safe manner. Do not drive the car
further.
2. Read the information on the information
display. Implement the action in accord-
ance with the message in the display. Clear
the message using READ.
The yellow information symbol illu-
minates and a text appears on the
information display. The message
text is cleared using the READ but-
ton, see page 56, or disappears
automatically after a period of time (time
depending on which function is indicated).
The yellow information symbol can also illumi-
nate in conjunction with other symbols.
NOTE
When a service message is shown, the sym-
bol and message are cleared using the
READ button, or disappear automatically
after a time.
Advertisement
Table of Contents
