Network Deployment - Vivotek FE8171V Quick Installation Manual

4

Network Deployment

General Connection (without PoE)
1. Connect RJ45 Ethernet cable to a switch. Use a Category 5 Cross Cable when your network
camera is directly connected to PC.
2. Connect the power cable from the Network Camera to a power outlet.
3. If you have external devices such as sensors and alarms, make the connection from the general
I/O terminal block.
General I/O Terminal Block
Power Cord Socket (Black)
Microphone In (Pink)
Audio Out (Green)
3
+3V3: Power, 3.3V DC
+3V3
DO: Digital Output
DO
D I: Digital Input
D1
GND: Ground
GND
EN - 9
1
2