Event Setting - Vivotek IP8362 User Manual

VIVOTEK

7.30 Event setting

Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
mdwin
mdwin0
vi
inter
152 - User's Manual
VALUE SECURITY DESCRIPTION
(get/set)
string[40] 6/6 Identification of this entry.
0, 1 6/6 Enable or disable this event.
0, 1, 2 6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
1~999 6/6 Delay in seconds before detecting the next event.
boot, 6/6 Indicate the trigger condition:
di, "boot" = System boot
motion, "di"= Digital input
seq, "motion" = Video motion detection
recnotify, "seq" = Periodic condition
tampering, "visignal" = Video input signal loss.
visignal, "recnotify" = Recording notification.
vi "tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
String[40] 6/6 The status for event trigger
<integer> 6/6 Indicate the source id of di trigger.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB indicates DI 0.
<integer> 6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
5.
<integer> 6/6 Similar to mdwin. The parameter takes effect when profile 1
of motion detection is enabled.
<integer> 6/6 Indicate the source id of vi trigger.
This field is required when trigger condition is "vi".
One bit represents one digital input. The LSB indicates VI 0.
1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition is "seq".
st
window.
st rd
and 3 windows, set mdwin as