Vivotek IP8362 User Manual page 158

VIVOTEK
adaptive_postevent
<product dependent>
7.34 HTTPS
Group: https (capability.protocol.https > 0)
NAME
enable
policy
method
status
countryname
stateorprovincename
localityname
organizationname
unit
commonname
validdays
7.35 Storage management setting
Currently it's for local storage (SD, CF card)
Group: disk_i<0~(n-1)> n is the total number of storage devices.
PARAMETER
cyclic_enabled
158 - User's Manual
0~10 6/6
VALUE SECURITY
(get/set)
<boolean> 6/6
<Boolean> 6/6
auto, 6/6
manual,
install
-3 ~ 1 6/7
string[2] 6/6
string[128] 6/6
string[128] 6/6
string[64] 6/6
string[32] 6/6
string[64] 6/6
0 ~ 3650 6/6
VALUE SECURITY
(get/set)
<boolean> 6/6
Indicate when is the adaptive recording stopped
after the event trigger point (seconds)
DESCRIPTION
To enable or disable secure HTTP.
If the value is 1, it will force HTTP connection
redirect to HTTPS connection
auto => Create self-signed certificate
automatically.
manual => Create self-signed certificate manually.
install => Create certificate request and install.
Specify the https status.
-3 = Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0 = Not installed
1 = Active
Country name in the certificate information.
State or province name in the certificate
information.
The locality name in the certificate information.
Organization name in the certificate information.
Organizational unit name in the certificate
information.
Common name in the certificate information.
Valid period for the certification.
(capability.storage.dbenabled > 0)
DESCRIPTION
Enable cyclic storage method.