Table of Contents
Advertisement
The Format and Restore Your Hard Disk procedure requires booting
from the NEC Ready Series Product Recovery CD and Restore
diskette. Here is the procedure to start the recovery process. Follow
it carefully.
1.
With system power on, insert the NEC Ready Series Product
Recovery CD into the CD-ROM reader.
2.
Insert the Restore diskette into the diskette drive.
3.
Reset your computer by simultaneously pressing the
and
Delete
keys on your keyboard.
Your computer takes a few minutes to recognize the
Recovery CD and Restore diskette. Then, the Master CD
System Diagnostics screen appears.
Note:
If your keyboard has frozen up and the reset
does not work, turn off the computer by pressing the power
button. Wait approximately 30 seconds, then press the
power button again.
4.
From the Master CD System Diagnostics screen, select the
Format and Restore Your Hard Disk
restore Windows 95, click
Windows 95
The next screen warns you that all of the stored data on your
hard disk will be erased.
5.
At the prompt to proceed with the format procedure, type
(for yes), and then press
6.
At the prompt, remove the diskette from the diskette drive.
Press
Enter
.
When the process is complete, you'll see the startup screen you saw
the first time you started up your computer.
Ready product recovery CD to the rescue! 83
Format and Restore Only
.
Enter
.
Ctrl
,
Alt
. If you only want to
Y
,
Advertisement
Table of Contents
