NEC PowerMate Ready ES Pro User Manual page 72

T
Was a Non-System Disk error message displayed when
you started the system?
If you are booting from the hard disk, check to see if you have
a diskette in the diskette drive. Remove the diskette from
drive A and restart the system.
If you are booting from the diskette drive, the diskette may
not be a bootable diskette. Replace the diskette with a
bootable diskette with system files. See your operating system
documentation to create a bootable diskette.
T
Is your mouse or keyboard not responding?
You may have connected the mouse and keyboard after
turning on your system. Turn the system off, make sure the
mouse and keyboard are connected, and then turn the system
back on.
Also check that the mouse and keyboard cables are attached
to the correct connector.
T
Does your system fail to recognize the CD-ROM?
Your drive designation may be incorrect. The default setting
for your CD-ROM reader is drive Q. If you have added hard
disks to your system, the drive Q assignment might be
different. Run Windows 95 My Computer to check the drive
assignments.
Solve problems 67