Configuring Dialog Box - Kodak ScanMate i1120 User Manual

Configuration dialog box
A-61602 January 2008
Remove Icon — displays the Remove Icon dialog box.
When you click Yes, you will close smart touch and remove the smart
touch icon from the system tray. If the checkbox is selected when you
exit, smart touch will restart automatically and appear in the system tray
the next time a user logs in. If the checkbox is unchecked when you
exit, the software will not be started on subsequent logins.
Administrator rights are required to change this setting.
The software can be started from the Program group by selecting
Start>Programs>Kodak>Document Imaging>i1120>Smart touch.
The software will also start automatically if you scan documents using
the Start button on the scanner.
The Configuration dialog box allows you to change the tasks associated
with each of the 9 function numbers.
When you select Configure from the function listing, the Configuration
dialog box will be displayed.
Task shortcut — select the function (1 through 9) that you want to
modify.
Rename — displays the Rename dialog box which allows you to enter
a new name for the Task shortcut.
25