Bluetooth; Monitor - Toshiba Satellite P100 Series User Manual

Troubleshooting

Bluetooth

For more information on wireless communication, refer to Chapter 4,
Operating
Problem
Cannot access
Bluetooth device

Monitor

Refer also to Chapter 8,
documentation.
Problem
Monitor does not turn
on
No display
Display error occurs
Monitor goes into
panning mode
9-18
Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
Make sure the Bluetooth Manager is running and
the power to the Bluetooth device is turned on.
Make sure no optional Bluetooth PC card and
Bluetooth SD card are installed in the computer.
The built-in Bluetooth function and an optional
Bluetooth PC card cannot operate
simultaneously. If problems persist, contact your
dealer.
Optional
Procedure
Make sure that the external monitor's power
switch is on. Confirm that the external monitor's
power cable is plugged into a working power
outlet.
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display
priority and make sure it is not set for the internal
display.
Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Check your monitor specification. It might not
support selected resolution and refresh rate. The
resolution on monitor might go into panning
mode when wide screen resolution is selected.
Refer to Appendix B,
Devices, and to your monitor's
Display Modes.
User's Manual