When Writing Or Rewriting; Writing Cds/Dvds On A Dvd Super Multi Drive Supporting Double Layer Disc Recording; Important Message; Disclaimer - Toshiba Satellite P100 Series User Manual

Hide thumbs Also See for Satellite P100 Series:
Table of Contents

Advertisement

When writing or rewriting

Note the following when you write or rewrite a CD-R or CD-RW.
Always copy data from the Hard disk drive to the CD. Do not use cut-
and-paste. The original data will be lost if there is a write error.
Do not perform any of the following actions:
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
Set the computer on a level surface and avoid places subject to
vibration, such as airplanes, trains, or cars. Do not use an unstable
surface, such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Writing CDs/DVDs on a DVD Super Multi drive
supporting double layer disc recording
You can use the DVD Super Multi drive to write data to either CD-R/RW or
DVD-R/-RW/+R/+RW/-RAM discs.

Important message

Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM
disc, read and follow all set-up and operating instructions in this section. If
you fail to do so, the DVD Super Multi drive may not function properly, and
you may fail to write or rewrite, lose data or incur other damage.

Disclaimer

TOSHIBA does not bear responsibility for the following:
Damage to any CD-R/RW or DVD-R/-RW/+R/+RW/-RAM disc that may
be caused by writing or rewriting with this product.
Any change or loss of the recorded contents of CD-R/RW or DVD-R/-
RW/ +R/+RW /-RAM disc that may be caused by writing or rewriting
with this product, or for any business profit loss or business interruption
that may be caused by the change or loss of the recorded contents.
Damage that may be caused by using third party equipment or
software.
User's Manual
Change users in the Windows
Operate the computer for any other function, including use of a
mouse or TouchPad, closing/opening the LCD panel.
Start a communication application, such as a modem.
Apply impact or vibration to the PC.
Install, remove or connect external drives, including the following:
PC card, USB devices, external display, i.LINK devices, optical
digital devices.
Open the optical disc drive.
®
XP operating system.
Operating Basics
4-29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents