Usb; Tv Output Signal - Toshiba Satellite P100 Series User Manual

Troubleshooting
Problem
The fingerprint cannot
be read due to injuries
to the finger.
Fingerprint Power on
Security or Single Sign
On feature cannot be
enabled.
Fingerprint Power on
Security does not work.

USB

Refer also to your USB device's documentation.
Problem
USB device does not
work

TV output signal

Problem
Display on TV is poor
No display
9-14
Procedure
Try the recognition process again using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.
Please use TOSHIBA Password Utility to register
the User Password if it was not registered.
1. Make sure you have enroll finger in windows
account.
2. Set the User Password by using TOSHIBA
Password Utility and restart the system.
3. Make sure place a checkmark in Replace the
power-on and hard drive passwords with
the fingerprint reader on the Protector Suite
QL setting.
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If problems persist, contact your dealer.
The Keyboard.
User's Manual