Scene Recall - Fostex VM04 Owner's Manual

If you want to quit the Scene Store in the middle of
its process, press the EXIT key. You can return to
the Normal Mix mode any time.
5. Press the ENTER key after you have named your
Scene.
The character section will momentarily show
"-STORE-" and return to the Normal Mix mode.

8-2. Scene Recall

This is the mode to recall the Scenes. All the stored settings will be recalled. Regarding the Fader
setting, the stored audio level will be perfectly recalled. However, the difference between the stored
Fader position and actual Fader position will only be indicated by the flashing FADER ADJUST key.
<Note>
The recall content will differ depending on the setting of the later explained setup modes "Channel fader recall" and
"Master fader recall." Refer to page 25 for details on the "SETUP mode."
1. Press the SCENE RECALL key.
The key will light up and the Scene number display
will start flashing. You can enter the Scene Recall
mode from whichever mode you are in.
For example, Normal Mix mode, Channel Edit mode
or Effect mode.
Scene No will blink
CH
MASTER
MAX
OL
R
0
6
12
24
48
L
MIN
1 2 3 4 L R 1 2 3 4 PAN
LEVEL VIEW
2. Rotate the DATA ENCODER and choose the Scene
number you want to recall from 00 to 20.
If you want to quit the Scene Recall mode now,
press the EXIT key. You can return to the Normal
Mix mode any time.
3. Press the ENTER key.
The character section will show "-Recall-"
momentarily and then the stored Scene name will
appear. The recall has been completed. As far as
audio is concerned, the audio level has also been
recalled according to the stored Fader setting.
However, at the same time, the FADER ADJUST key
will start flashing.
OL
0
6
FADER ADJUST
12
24
48
1 2
LEVEL
Flashing
SCENE
RECALL
SCENE No
EFFECT
TYPE
EQ
LO HI EFF
EQ
SETUP
Lights up (green)
SCENE No
CH MASTER
MAX
R
EQ
L
MIN
3 4 L R 1 2 3 4 PAN LO HI EFF
VIEW EQ
VM04 Owner's manual
The store process has been completed. The stored
Scenes are kept even after powering OFF.
<Useful info>
You can press the STORE key instead of the ENTER key to
store the Scene. If you do this, you won't quit the Scene
Store mode, i.e., you won't return to the Normal Mix mode.
So, you can carry on storing more Scenes one after another
As the VM04 Faders do not move automatically,
this is the way the VM04 indicates that it has
detected some discrepancy between the physical
Fader position now and when the Scenes were
stored. At this stage, as the VM04 is already in the
Normal Mix mode, you can operate the Faders.
Then, if you move all the faders, the FADER ADJUST
STORE key light will switch off and a letter
in the character section next to the Scene name.
This stands for Edit and means the Fader position
PARAMETER
is different from the stored setting. Even if you
move the Faders, it won't change the Fader setting
stored in the Scenes.
Finally, if you want to recall a Scene including the
physical Fader position, see Fader Adjust mode.
<Useful info>
You can also press the RECALL key again instead of the
ENTER key to recall the Scenes. In this case, as the VM04
won't quit the Scene Recall mode, you will be able to keep
recalling Scenes, one after another. This is very useful, for
instance, if you are trying to recall a Scene, but you don't
remember its Scene number. You can search for it by
listening to the sound.
23
will appear