Effect Parameter Setting - Fostex VM04 Owner's Manual

VM04 Owner's manual

7-2. EFFECT PARAMETER setting

You can alter the parameter setting according to the Effect type.
The parameters available in each Effect type.
The available parameters differ according to the Effect type. These are discussed here.
1. Reverb related Effects
The 12 Effects from 1:HallRev1 to 12:Stadium2
are the Reverb related Effects.
They have five parameters:
1.Reverb Level (RevLv : 0~99)
2.Reverb Time (RevTim: 0.1~9.9 Sec)
3.Pre Delay Time (PreDl: 0~150 mSec)
4.High Dump (HiDmp: 0~10)
5.Early Reflection Balance (ErBal: 0~99)
2. Delay related Effects
13:Delay and 15:L-R Delay are the Delay
related Effects. They have three parameters:
1. Delay Level (DlyLv: 0~99)
2. Delay Time (DlyTm: 5~995 mSec, also 1.0~1.4
Sec)
3. Feedback Level (FBack:-99~0~99, the negative
numerals indicate the reverse phase)
3. Combined Delay/Reverb Effects
14:Delay+Rev and 16:L-R+Rev are the Effects
you get when Delay and Reverb are combined
together. They have five parameters:
1. Delay Level (DlyLv:0~99)
2. Delay Time (DlyTm: 2~500 mSec)
3. Feedback Level (FBack:-99~0~99, the negative
numerals indicate the reverse phase)
4. Reverb Level (RevLv: 0~99)
5. Reverb Time (RevTm: 0.1~9.9 Sec)
4. Chorus related Effect
17:Chorus is the Chorus related Effect.
This has three parameters:
1. Chorus Level (ChoLv: 0~99)
2. Modulation Frequency (Rate: 0.1~9.9 Hz)
3. Chorus Depth (Depth: 0~99)
5. Combined Chorus/Reverb Effect
18:Cho+Rev is the Effect you get when Chorus
and Reverb are combined together.
This has five parameters:
1. Chorus Level (ChoLv: 0~99)
2. Modulation Frequency (Rate: 0.1~9.9 Hz)
3. Chorus Depth (Depth: 0~99)
4. Reverb Level (RevLv: 0~99)
5. Reverb Time (RevTm: 0.1~9.9 Sec)
6. Flanger related Effect
19:Flange is the Flanger related Effect.
This has three parameters:
1. Flange Level (FlaLv: 0~99)
2. Modulation Frequency (Rate: 0.01~0.99 Hz)
3. Feedback Level (FBack: -99~0~99, the negative
numerals indicate the reverse phase)
7. Combined Flanger/Reverb Effect
20:Fla+Rev is the Effect you get when Flanger
and Reverb are combined together.
This has five parameters:
1. Flange Level ( FlaLv: 0~99)
2. Modulation Frequency (Rate: 0.01~0.99 Hz)
3. Feedback Level (FBack: -99~0~99, the negative
numerals indicate the reverse phase)
4. Reverb Level (RevLv: 0~99)
5. Reverb Time (RevTm: 0.1~9.9 Sec)
20