Removing A Disk From The Scsi Drive - Fostex FD-4 Owner's Manual

3. Turn the JOG dial to select a recording mode.
Turning the JOG dial counter-clockwise (to the left) will
display the recording mode indication in the order of [Nor-
mal] -> [Master 2] -> [Master 1].
44.1kHz
SETUP
SURE?
SYNC OUT DRIVE
AUTO A.PUNCH
4. Press the EXECUTE/YES key while holding
down the RECORD button.
The [Format ?] message lights up on the display, and a nega-
tive value of the unformatted disk area size (Megabytes)
will count down as the format operation progresses. All keys
will be disabled during the format operation. Please wait a
while.
When formatting is complete, [COMPLETED !] lights up on
the display, and the FD-4 stops accessing the SCSI disk. The
display looks something like below. (If you have selected
Mastering mode 1 or 2, [44.1kHz] lights up on the display.)
5. Press the STOP button or the EXIT/NO key.
Press the STOP button or the EXIT/NO key to exit SETUP
mode. The Time Base will change to ABS (ABS 0 appears).
Formatting will automatically create one Program on the
disk (PGM 01), and display its title (#0001). (This title also
appears whenever you insert a formatted disk in the SCSI
drive.) The display indicators mean the following:
"Temporary title" for
Program 1 (See Note 1.)
ABS
ABS time 0
ABS is selected as
Time Base. (See
The default setting of
Note 4.)
SYNC OUT (See Note 5.)
SETUP
SURE?
SYNC OUT
SCSI
AUTO
44.1kHz
SETUP
SURE?
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
COMPLETED
SYNC OUT DRIVE
CLK SCSI
AUTO A.PUNCH
Program number
(See Note 2.)
44.1kHz
M S F
PGM
SYNC OUT DRIVE
CLK SCSI
AUTO A.PUNCH
The current drive
is a SCSI drive.
<Note 1>
When you format a disk, a Program is named "temporary title."
You can edit this title as you wish. For more information, refer to "Edit-
ing a Program title" of the "Handling Programs" chapter on page 39.
<Note 2>
44.1kHz
Formatting will automatically create one Program on the disk. You can
create up to 99 Programs, depending on the available disk space.
DRIVE
SCSI
A.PUNCH
You can also select a desired Program from multiple Programs.
For more information, refer to "Managing songs by Program Change
function" in the "Before Starting" chapter on page 25. For more infor-
mation, refer to "Using a Program Change function" on page 37.
<Note 3>
If you format a disk in Master 1 or Master 2 recording mode, the sam-
pling rate indicator [44.1kHz] lights up. If you select Normal mode,
nothing lights up.
<Note 4>
After formatting the disk, the FD-4 automatically selects ABS as Time
Base. You can select ABS, MTC time, or BAR/BEAT/CLK as the Time
Base. For more information, refer to the "Display Section" in the "Names
and Functions" chapter on page 21.
<Note 5>
The indicated "SYNC OUT" setting ([CLK]) means that clock signals
(MIDI clock signal and Song Position Pointer) are output as a sync
signal from the FD-4's MIDI OUT connector to an external MIDI de-
vice. You may change this setting, if necessary, when you are using
the FD-4 to sync with an external MIDI device. For more information,
refer to "SYNC OUT setting" in the "Changing the Initial Settings" chap-
ter on page 86.
Now that you completed connecting the SCSI drive and for-
!
matting the disk, you can start recording and playing back.

Removing a disk from the SCSI drive

If a removable disk is inside the SCSI drive, you cannot
eject it using the eject switch on the drive. Follow the proce-
dure below using the key on the control panel of the FD-4
to eject the disk.
1. Press the EXIT/NO key while holding down
the SHIFT key.
The disk is ejected from the SCSI drive and [No Disk] ap-
pears on the display.
1/L
START
HOLD/
SHIFT
AUTO
PUNCH
RECORD
Recording preparation
RECORD TRACK
2/R 3/L 4/R L R
ADD. TRACK
PREVIEW
TIME BASE
DISP SEL SETUP
IN OUT END IN OUT
AUTO PUNCH CLIPBOARD
AUTO RTN
UNDO/
EXECUTE EXIT
STORE EDIT REDO
/YES
PGM SEL
ELECT
VARI AUTO RTN
PITCH AUTO PLAY LOCATE
ACCESS
JOG SHUTTLE
P. EDIT LOC MEM
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
STOP PLAY REWIND F FWD
1
SEL
/NO
7