Configuring Light-Weight Directory Access Protocol (Ldap) Settings - Supero SMT IPMI User Manual

SMT IPMI User's Guide
2.8.3 Configuring Light-Weight Directory Access Protocol
(LDAP) Settings
This feature allows the user to configure the Light-Weight Directory Access Proto-
col (LDAP) settings. When you click <LDAP> in the Options window, the following
screen will display.
1
2
3
4
5
6
7
Follow the steps below to configure the LDAP settings.
1. Check the enable box to enable LDAP Authentication and LDAP Authentica-
tion over SSL support.
2. Enter a port number for the LDAP server.
3. Enter an IP Address for the LDAP server.
4. Enter a Bind Password for the LDAP server.
5. Enter a Bind DN value in the field. (The bind DN is the user or the LDAP
server that is permitted to do search in the LDAP directory within a defined
search base.)
6. Enter a SearchBase value in the field. (The SearchBase is the directory that
allows the external user to search data.)
7. After entering the information in the fields, click <Save> to save the informa-
tion you've entered.
2-20