Using Ie* To Access The Bmc/Ipmi Settings From Your Computer; To Log In - Supero Embedded BMC/IPMI User Manual

Embedded BMC/IPMI User's Guide
2-2 Using IE* to Access the BMC/IPMI Settings from
Your Computer

2.2.1 To Log In

Once you are connected to the remote server, the following screen will display.
1. Enter your Username.
2. Enter your Password and click <Login>.
3. The Home Page will display on the next page.
Note 1: To use the IPMIView Utility to access BMC/IPMI settings, refer to the
IPMIView User's Guide for instructions.
Note 2: The manufacturer default username and password are ADMIN. Once
you have logged into the BMC using the manufacturer default password, be sure
to change your password for system security.
Note 3: For IPMI to work properly, please enable all onboard USB ports and the
COM port designated for SOL (IPMI) on the motherboard. All USB ports and the
COM port for IPMI are enabled in the system BIOS by default. The COM port
for IPMI is marked with "*" in the BIOS. It is usually listed as COM2 or COM3 in
the BIOS. Refer to Section 2-1 Configuring BIOS.
2-6