Supero SMT IPMI User Manual page 34

SMT IPMI User's Guide
Configuring the Active Directory Settings
This feature allows the user to configure the Advanced Active Directory settings.
When you click <Here> on the screen shown on the previous page, the following
screen will display.
1
2
3
4
5
6
1. Check the <Enable> box to enable Active Directory authentication support.
Then, Enter the values in the fields below.
2. Enter User Domain Name in the field.
3. Enter Time Out value in the field to set the time limit for a user to stay
logging-in.
4. Enter <Controller Server Address1>.
5. Enter <Controller Server Address2>.
6. Enter <Controller Server Address3>.
After entering the information, click <Save> to save the settings.
2-22