Using Your Sunbeam Café Series - Sunbeam ES9600 Instruction Booklet

Using your Sunbeam Café Series
Food Slicer
1. E nsure that all parts of the food slicer
are correctly in place. Place the fully
assembled appliance on a flat level
surface with the width selection dial to
your left. See Figure 2.
Figure 2
2. A pply downward pressure onto the slicer,
ensuring it is pressed firmly to the bench
to activate the suction cup feet.
3. P ull the sliding food guide towards you,
as far as it will slide. Place the food to be
sliced on the sliding food guide with the
safety food holder in place, so that it rests
against the width panel. See Figure 3. Do
not rest food against the blade. Ensure
that the safety food holder holds the food
firmly in place.
Figure 3
Note: If the length of the food to be sliced
is longer than the sliding guide, connect
the extension tray to the sliding food guide,
using the 2 hole cutouts on the sliding guide
to align and connect the extension tray. See
Figure 4.
4. R emove the food collection tray from
underneath the unit and place it on the
left hand side of the food slicer to collect
the slices. See Figure 5.
®
Figure 4
Figure 5
7