Advertisement

Quick Links

QuickStart Guide
FortiDeceptor Rugged 100G
FDR-100G

Advertisement

Table of Contents
loading

Summary of Contents for Fortinet FortiDeceptor Rugged 100G

  • Page 1 QuickStart Guide FortiDeceptor Rugged 100G FDR-100G...
  • Page 2: Before You Begin

    Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests.
  • Page 3: Package Contents

    1x Console Cable contact FortiCare Support at https://www.fortinet.com/support/contact Self-service Resources Access our knowledge base, forums, videos and technical experts at https://www.fortinet.com/support/support-services/forticare-support 1x DC Connector 1x AC DC Adapter Thank you for choosing Fortinet 2x Mounting Brackets 1x Power Cord 4x M3x10L Screws...
  • Page 4: Desktop Installation

    Note: Configure the management computer with IP 192.168.0.x and where the clearance needs to be 4.3in subnet 255.255.255.0 Speed (default): 9600 Data bits: Stop bits: Console Cable Parity: None Flow Control: None Console Port Note: For a detailed CLI guide, visit docs.fortinet.com For other documentation, visit https://docs.fortinet.com/product/fortideceptor...
  • Page 5: Wall Installation

    Wall Installation Bracket Dimensions Secure the mounting bracket to the bottom of the device with the M3x10L screws Dimensions in millimeters Power Connections In systems configured with the redundant power option, connect PWR1 and Measure and install anchors (not included), then affix screws (not included) to PWR2 to separate independent power sources for power redundancy.
  • Page 6 Front Rear Console Port (RJ45) HDMI Port Not in use Power Input 24V to 48V DC, 3.45-1.77A or 24V DC @ 5A Ports 1 to 6 (RJ45) Amber: Connected at 1000M Green: Connected at 100M SPEED Grounding Screw SPEED Off: No link established or connected at 10M Amber: Link established, no activity RJ45 Flashing...
  • Page 7 Product Safety Electrical Appliance & Material (PSE) – Japan 日本では電気用品安全法(PSE)の規定により、同梱している電源コードは本製品の専用電源コードとして利用し、他の製品に使用しないでくだ さい。 Bureau of Standards Metrology and Inspection (BSMI) – Taiwan The presence conditions of the restricted substance (BSMI RoHS table) are available at the link below: 限用物質含有情況表 (RoHS Table) 請到以下 網址下載: https://www.fortinet.com/bsmi 警告: 為避免電磁干擾,本產品不應安裝或使用於住宅環境。 請仔細閱讀以下說明 本設備勿置於潮濕處。 連接至電源前,請先檢查電壓。 當設備不用時,請將所有電源線拔除,避免電壓不穩而造成傷害。...
  • Page 9 Fortinet.com...

This manual is also suitable for:

Fdr-100g

Table of Contents