Replacing License Plate Lamp Bulbs - Ford 2011 Edge Owner's Manual

Ford 2010 edge automobile owner's manual

Hide thumbs Also See for 2011 Edge:

Table of Contents

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is

in the off position.

2. Press the lever and carefully pry

the license plate lamp assembly

(located above the license plate)

from the liftgate.

3. Rotate the bulb socket

counterclockwise and remove from

lamp assembly.

4. Pull bulb straight out of socket

and push in the new bulb.

5. Install the bulb socket into the

lamp assembly and rotate clockwise.

6. To install, carefully press the

lamp assembly into the liftgate.

2011 Edge (edg)

Owners Guide, 1st Printing