Replacing Tail Lamp/Backup Lamp Bulbs - Ford 2010 Ranger Owner's Manual

Lights
4. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
5. Carefully pull bulb straight out of
socket and push in the new bulb.
6. Install the bulb socket in lamp
assembly by turning clockwise.
Install the new bulb in reverse
order.

Replacing tail lamp/backup lamp bulbs

1. Make sure the headlamp switch is
in the off position, then open the
tailgate to expose the lamp
assemblies.
2. Remove the four screws and the
lamp assembly from vehicle.
52
2010 Ranger (ran)
Owners Guide, 1st Printing
USA (fus)