Starting The Engine - Ford 2010 Ranger Owner's Manual

Ford 2010 ranger automobile owner's manual
Hide thumbs Also See for 2010 Ranger:
Table of Contents

Advertisement

If starting a vehicle with a manual
transmission:
• Make sure the parking brake is
set.
• Press and hold the clutch pedal
to the floor, then put the
gearshift lever in the N (Neutral)
position.
3. Turn the key to 4 (on) without
turning the key to 5 (start).
If there is difficulty in turning the key, firmly rotate the steering wheel
left and right until the key turns freely. This condition may occur when:
• front wheels are turned
• front wheel is against the curb
• steering wheel is turned when getting in or out of the vehicle
Some warning lights will briefly illuminate. See Warning lights and
chimes in the Instrument Cluster chapter for more information
regarding the warning lights.

Starting the engine

Note: Whenever you start your vehicle, release the key as soon as the
engine starts. Excessive cranking could damage the starter.
2010 Ranger (ran)
Owners Guide, 1st Printing
USA (fus)
Driving
4
3
5
2
1
161

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esp 2009

Table of Contents

Save PDF