Shure PSM700 User Manual page 10

MixMode for Multiple Systems
Some performers need to hear more of their
own voice or instrument, while others want to
hear more of the band. With this setup, each
performer hears a combination of the whole band
and their own instrument, and they can use the
receiver's balance control to create the desired
mix of the two.
Setup each system for MixMode. From the
mixing console, send a mix of the whole band to
input 2 of the first transmitter. Connect input 2 of
the next transmitter to the LOOP OUT R output of
the first transmitter. Continue the chain with all
the transmitters. Next, create solo mixes for each
performer using the auxiliary outputs of the
mixing console. Send these mixes to input 1 of
each performer's transmitter.
Floor Monitors
Connect the LOOP OUT connectors to the amplifier for
onstage loudspeakers. The P7R and the onstage monitors
will have the same audio.
Recording Devices
To record a performance, connect the LOOP outputs
to the inputs of a tape deck, DAT, or other recording
device.
8
- English
Solo Mixes Band Mix