Configuring Apple Logic On Os X; X-Firewire Equipped Apogee Interfaces; Configuring Itunes On Os X - Apogee X-FireWire Card Owner's Manual

X-FireWire – User's Guide
Configuring Audio Applications for use with X-Firewire
equipped Apogee Interfaces (continued)
Configuring Apple Logic on OS X (continued)
8 In Logic's Track Mixer, set the inputs and outputs of Audio objects to the desired hard-
ware I/O channels, as shown below.
Configuring iTunes on OS X.
1 Open the Audio Midi Setup ultility, found
on an OS X Macintosh here: Applications >
Utilities > Audio MIDI Setup.
2 Set Default Input, Default Output,
and System Output to Apogee Firewire
(xxxx) The X-Firewire serial number is
displayed in parentheses.
3 In Audio Midi Setup, set Properties For
to Apogee Firewire (xxxx), set Clock
Source to Apogee Firewire (xxxx) Synch
and Format to 44100.0Hz.
4 Open iTunes, and play!
22