Rosetta 800S With Digidesign Interfaces - Apogee X-Digi-Mix Card User Manual

X-Digi-Mix – User's Guide
Connecting & Configuring the X-Digi-Mix-equipped
Apogee Interface -
Connecting Rosetta 800 & Digidesign Interfaces
(ROSETTA 800)
(Digi-888)
• When connecting a Rosetta 800 and a Digidesign interface, Apogee recommends that the
Rosetta 800 be connected to the Mix Core or d24 card, thereby configuring it as the clock master
of the system; the Digidesign interfaces should be connected to the remaining cards.
• Connect the X-Digi-Mix Card Superclock Out to the Digidesign interface's Superclock In,
and chain Superclock to remaining Digidesign interfaces as instructed in the Digidesign
documentation.
• To connect a Rosetta 800 to an HD system via the Legacy port, set the Rosetta 800 to internal
clock, connect Rosetta 800 WC out to the HD interface WC in, and set the HD interface clock
source to WC in.
(ROSETTA 800)
(Digi-96)
6
APOGEE ELECTRONICS
continued
– Front Panel Settings
– Front Panel Settings
Master Unit
Slave Unit
Master Unit
Slave Unit