Working With Pro Tools - Apogee X-Digi-Mix Card User Manual

X-Digi-Mix – User's Guide
Working with ProTools -
To record at a higher resolution sample rate:
1) Create a Pro Tools session whose sample rate is half the desired rate (i.e., create a 44.1kHz
session to record 88.2kHz audio.
2) Once the Apogee interface has recognized the sample rate of the session, manually set it to the
desired high resolution sample rate. When using more than one Apogee interface, the Slave
interfaces must be clocked from the Master Word Clock Output.
3) For every track of high resolution audio desired, create a stereo track in the session. Routing of
audio is as depicted below:
ROSETTA 800 Analog In
Input 1
Input 2
Input 3
Input 4
4) Keep in mind that it's possible to run one interface at a lower sample rate (for example to play back
tracks), and a second interface at a higher sample rate (for example to record an analog mix of the
tracks being played back).
8
APOGEE ELECTRONICS
continued
Session Tracks
(and I/O routing)
Tracks 1-2
Tracks 3-4
Tracks 5-6
Tracks 7-8
ROSETTA 800 Analog Out
Output 1
Output 2
Output 3
Output 4