AOpen AX4SG Online Manual page 47

A X 4 S G / A X 4 S G
A X 4 S G / A X 4 S G
R A I D C o n f i g u r a t i o
R A I D C o n f i g u r a t i o
In order to make sure your system can recognize and operate Serial ATA RAID device smoothly, we have to enter RAID
Configuration Utility to do some configuration. After finishing the BIOS setup and reboot, you will see [Press CTRL + I to enter
configuration Utility] about half way through the boot up. Please press these two buttons simultaneously. When you enter you
will be presented with a screen as shown below:
- N / A X 4 S G - L
- N / A X 4 S G - L
n U t i l i t y
n U t i l i t y
1. Create RAID Volume:
This section allows users to choose the strip
size and disk volume of RAID.
2. Delete RAID Volume:
This section allows users to delete the volume
of RAID. Please be noted that deleting a
volume will destroy volume data and cause
any member disks to become available as
non-RAID disks.
3. Reset Disks to Non-RAID:
Users can remove
structures from all RAID disks, including disks
with working volume. Select "Yes" will cause
all data on any disk to be lost.
47
O n l i n e M a n u a
O n l i n e M a n u a
any internal RAID
l
l