AOpen AX4SG Online Manual page 101

A X 4 S G / A X 4 S G
A X 4 S G / A X 4 S G
2. Start your Windows NT system and log in. You must have System Administrator privileges to install the driver software.
3. Open the Control Panel.
4. In the Control Panel, double-click the Network icon.
5. When the Network window opens, select the Adapters tab.
6. Click "Add" to install a new adapter.
All previously installed drivers are listed under Network Adapters
7. When the Select Network Adapter window opens, click "Have Disk"....
8. When prompted, insert the driver installation media, or choose a location to install the driver from. Type the path to the driver,
and click "OK".
For example, to install the adapter driver software for Windows NT, type D:\Driver\Lan\BCM5705 in the Insert Disk location
box (where "d:\Driver\Lan\BCM5705" is the designation of the Lan driver on Bonus CD).
9. With "Gigabit Ethernet Controller" highlighted in the Select OEM Option window, click "OK".
The adapter files are installed, and then the Network window is displayed showing the newly installed adapter.
10. Click "Close", then the Microsoft TCP/IP Properties window appears.
11. Configure the TCP/IP protocol and click "OK".
12. When prompted to restart your computer, click "Yes".
- N / A X 4 S G - L
- N / A X 4 S G - L
101
O n l i n e M a n u a l
O n l i n e M a n u a l