Optional) Install Edvr Client Software - American Dynamics EDVR Quick Setup Manual

EDVR Quick Setup Guide
F. (Optional) Install EDVR Client Software
To remotely view and manage one or more EDVRs from a PC, install the included EDVR Client
Software.
Note
Both the EDVR and the PC must be physically connected to the same network (LAN).
1 Insert the enclosed CD in the CD-ROM drive of the PC from which you wish to remotely
monitor one or more EDVRs. The software installation automatically starts.
2 Follow the on-screen instructions. The default username is admin and the default password is
9999.
3 Refer to the Installation and Operation Guide (on the included CD) for step-by-step installation
and configuration instructions and an overview of the features.
Also refer to the Installation and Operation Guide for details about using a Web browser to
remotely view one or more EDVRs.
G. Connecting a SpeedDome Ultra or Optima to EDVR
1 Connect the hardware. Refer to the following diagram:
EDVR
2 To configure the COM port, press the MENU button. Select Advanced Settings >
Communication > RS485 Settings using the arrow buttons or jog dial and pressing the ENTER
button. Set the Baud Rate (for example 4800 for AD SpeedDome Ultra or Optima) using the
shuttle ring. Keep pressing the MENU button to return to the Main Menu.
3 To configure dome settings, press the MENU button. Select Advanced Settings > Dome
Settings using the arrow buttons or jog dial and pressing the ENTER button. Highlight the
appropriate camera, set the ID (integer 1-254) and select the protocol suitable for the dome
using the shuttle ring (for example: AD422 for AD SpeedDome Ultra or Optima). Keep pressing
the MENU button to return to the Main Menu.
4
BNC Video
RS 485 D+
D-
Terminal Block
4800 Baud
RS 422 RX+
RX-
DOME
EDVR Quick Setup Guide