Rear Panel Controls And Functions - Elation Stage Setter 8 User Instructions

Stage Setter 8™
17 18 19
Rear Panel
Rear Panel - Controls and Functions
17. DC Power Input:
This jack is used to connect to external power supply. Only use the
included DC 12~20V, 500 mA minimum power supply. If it becomes
necessary to replace the original power supply, only use an approved
Elation power supply.
18. Power Switch:
This switch is used to turn the unit's main power On/Off.
19. DMX Out:
This XLR jack is used to send DMX data to your DMX dimmer packs or
other DMX fixtures.
20. DMX Out:
This is another XLR jack that is used to send DMX data to your DMX
dimmer packs or other DMX fixtures.
Elation Professional - www.elationlighting.com - Stage Setter 8™ Instruction Manual Page 13
®
Controls and Functions
20 21 22 23
Rear Panel Label
Stage Setter 8™
Rear Panel - Controls and Functions (Cont.)
21. MIDI Thru:
This jack is used to parallel an incoming MIDI signal through to another
MIDI device.
22. MIDI In:
This jack receives an incoming MIDI signal from external MIDI control-
ler or keyboard.
23. Fog Machine Connector:
Use this connection to connect a compatible Elation fog machine, such
as the Master Blaster 700 and 1000, Vaporizer, and the Dyno Fog. This
eliminate the need of separate controller.
Elation Professional - www.elationlighting.com - Stage Setter 8™ Instruction Manual Page 14
®
Controls and Functions