Troubleshooting - American DJ FREQ Matrix Quad User Instructions

FREQ Matrix Quad
Channel Value
1
0 - 255
2
0 - 255
3
0 - 255
4
0 - 255
5
0 - 255
6
0 - 255
7
0 - 255
8
0 - 255
*Channels 9-56 continue the same RGBW LED Pattern*
57
0 - 255
58
0 - 255
59
0 - 255
60
0 - 255
61
0 - 255
62
0 - 255
63
0 - 255
64
0 - 255
ADJ Products, LLC - www.adj.com - FREQ Matrix Quad Instruction Manual Page 17
64 Channel Mode
Function
RED 1
0% - 100%
GREEN 1
0% - 100%
BLUE 1
0% - 100%
WHITE 1
0% - 100%
RED 2
0% - 100%
GREEN 2
0% - 100%
BLUE 2
0% - 100%
WHITE 2
0% - 100%
RED 15
0% - 100%
GREEN 15
0% - 100%
BLUE 15
0% - 100%
WHITE 15
0% - 100%
RED 16
0% - 100%
GREEN 16
0% - 100%
BLUE 16
0% - 100%
WHITE 16
0% - 100%
FREQ Matrix Quad
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 3 fixtures maximum. After 3 fixtures you will need to
use a new power outlet. They must be the same fixtures. DO NOT
mix fixtures.
FREQ Matrix Quad
Locate and remove the unit's power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder has a built-in socket for a spare fuse be sure not to confuse
the spare fuse with active fuse.
FREQ Matrix Quad
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
FREQ Matrix Quad
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact ADJ Products, LLC for service.
1-800-322-6337
ADJ Products, LLC - www.adj.com - FREQ Matrix Quad Instruction Manual Page 18
Power Cord Daisy Chain
Fuse Replacement
Cleaning
Trouble Shooting