Operation - American DJ FREQ Matrix Quad User Instructions

Table of Contents

Advertisement

FREQ Matrix Quad
press ENTER, then press and hold the MENU button to confirm.
Please see pages 8-9 for more info about Show Mode.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See below for UC3
controls and functions.
FREQ Matrix Quad
Master-Slave Operation:
units together and operate without a controller. In Master-Slave opera-
tion one unit will act as the controlling unit and the others will react to
the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using appropriate XLR cables, daisy chain your units together via
the XLR connector on the rear of the units. Remember the Male
XLR connector is the input and the Female XLR connector is the
output. The first unit in the chain (master) will use the female XLR
con nector only - The last unit in the chain will use the male XLR
con nector only. For longer cable runs we suggest a terminator at
the last fixture.
2. Set the Master unit to your desired operational mode.
3. On the slave units
tap the MENU button until "SLND" is display-
ed, and Press ENTER. Use the UP or DOWN buttons to switch
between either "SL 1" or "SL 2". Once you have made your
choice, press ENTER. For more info see page 8.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See UC3 Control below.
FREQ Matrix Quad
Blackout Blackout the unit
Strobe
1. Synchronous strobe in white
Function
2. Sound strobe in white
3. Sound strobe in color
Mode
Strobe
(LED OFF)
ADJ Products, LLC - www.adj.com - FREQ Matrix Quad Instruction Manual Page 13
Master-Slave Set Up
This function will allow you to link up to 16
UC3 Control
Color1-9
Show1-8
Color10 Sound
Change Color
Manual Color
Show
(LED ON)
(LED slow blinking)

Operation

FREQ Matrix Quad
Channel
1
2
FREQ Matrix Quad
ADJ Products, LLC - www.adj.com - FREQ Matrix Quad Instruction Manual Page 14
Value
Function
0 - 255
0% - 100%
STROBING
0 - 15
16 - 255
STROBING SLOW - FAST
2 Channel Mode
DIMMER
OPEN
Photometric Chart

Advertisement

Table of Contents
loading

Table of Contents