Vrrp Group-Id Description; Vrrp Group-Id Ip-Address - Alcatel-Lucent OmniAccess 5740 Cli Command Reference Manual

Left running head:
Chapter name (automatic)
Virtual Router Redundancy Protocol
-
VRRP GROUP ID DESCRIPTION
vrrp <1-8> description <string>
D
ESCRIPTION
This command is used in the Interface Configuration Mode. This command
assigns a textual description for the VRRP group. The description string can be up
to 80 characters.
P
ARAMETERS
1-8
string
E
XAMPLE
ALU(config-if GigabitEthernet3/0)# vrrp 7 description ALU-vrrp
-
VRRP GROUP
ID
vrrp <1-8> ip <ip-address>
D
ESCRIPTION
This command is entered in the Interface Configuration Mode. This command
enables VRRP for the specified group with the specified ID on the interface and
specifies a primary IP address for the group. A VRRP group is enabled only after
the primary IP address is configured on the interface.
P
ARAMETERS
1-8
ip-address
E
XAMPLE
ALU(config-if GigabitEthernet3/0)#vrrp 5 ip 10.91.0.8
162
Beta
Parameter
-
IP ADDRESS
Parameter
Alcatel-Lucent
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Description
Specifies the group number. It is in the
range 1 - 8.
A descriptive text ranging from 1 - 80
characters.
Description
Specifies the group number. It is in the
range 1 - 8.
Primary IP address of the VRRP group.
Beta