Connecting Your Components
Connecting the Power Cord
Supplied
power cord
AC INLET
1
Connect all of your speakers and AV
components.
2
Connect the supplied power cord to the
network tuner's AC INLET.
3
Plug the power cord into an AC wall outlet.
Turning On and Standby
Press the [ O N/STANDBY] button.
1
Alternatively, press the remote controller's
[ ] button.
The tuner comes on, and the display lights up.
To turn the tuner off, press the [ ON/STANDBY]
button, or press the remote controller's [ ] button. The
tuner will enter Standby mode.
—Continued
To an AC wall outlet
(Plug type varies from
country to country.)
15
En-