Onkyo CBX-100 Instruction Manual page 42

CBX-100_En.book Page 42 Friday, September 15, 2006 9:34 AM
Using the Timers —Continued
7 If you selected Every, use the Pre-
vious and Next [
tons to select the day, Everyday, or
Days Set, and then press [ENTER].
You can select the following:
MON TUE
Days Set
SUN
8 If you selected Days Set, use the
Previous and Next [
tons to select the first day, and
then press [ENTER].
Use the Previous and Next [
[ ] buttons again to select the
last day, and then press [ENTER].
You can select only consecutive days.
9
Use the Previous and Next [
[ ] buttons to specify the On
time, and then press [ENTER].
You can also use the remote controller's
number buttons to enter the time. For
example, to enter 7:29, press [7], [2], and
[9].
To switch between A.M. and P.M. for the
12-hour format, press the [>10] button.
Note:
• Once the On time is set, the Off time is
automatically set to one hour later.
10 Use the Previous and Next [
[ ] buttons to specify the Off
time, and then press [ENTER].
42
11
]/[ ] but-
WED THU FRI
Everyday SAT
]/[ ] but-
12
]/
]/
To return to step 1 and start timer programming all over
again, press the [EDIT/NO] button at any point in this
procedure.
]/
Use the Previous and Next [
[ ] buttons to specify the
CBX-100's volume level, and then
press [ENTER].
TIMER indicator
Number of programmed timer
The default setting is 15.
Press the [STANDBY/ON] button to
set the CBX-100 to Standby.
Notes:
• Be sure to set the CBX-100 to Standby,
otherwise the timed operation will not
work.
• While a timed operation is in progress,
you can cancel it by pressing the
[TIMER] or [SLEEP] button.
• Memory, random, and 1-folder play-
back cannot be used with the timers.
]/