Selecting Dab Stations (Cr-545Ukd); Dab Setup (Cr-545Ukd) - Onkyo CR-545 Instruction Manual

Listening to the Radio—Continued

Selecting DAB Stations (CR-545UKD)

1
Use the [ ] / [
the DAB stations.
If a secondary service is available, a right
angle bracket (>) is displayed.
Press the [ ] button to listen to the
secondary service.
While the secondary service is selected, a left
angle bracket (<) is displayed.
Press the [ ] button to return to the
primary service.
When you select a station that you've selected
a lot in the past, the letter F (short for
Favorite) is displayed.
2
Press [ENTER].
The station is tuned.
If you select a station that cannot be received
properly, "NotAvailable" is displayed.
Displaying DAB Radio Information
Press the remote controller's [DISPLAY] button
repeatedly to display more information about the
selected DAB station.
1. DLS (Dynamic Label Segment)
When tuned to a station that's broadcasting DLS
text data, the text will scroll across the display.
2. Program Type
Displays the type of program.
36
] buttons to select
"F"
(Scroll)
3. Multiplex Name
Displays the name of the current multiplex.
4. Channel and Frequency
Displays the channel and frequency of the current
multiplex.
5. Bit Rate and Audio Mode
Displays the station's bit rate and audio mode
(stereo or mono).
6. Signal Quality
Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception
7. Sensitivity
Display the sensitivity of reception. Keep 100%
for good reception.

DAB Setup (CR-545UKD)

Use the following functions and settings to set up
DAB digital radio.
1
Press the [MENU / CLEAR] button
repeatedly until the item to be set
appears.
2
Press [ENTER].
The items are explained below.
• Auto Scan?
This setting determines which DAB frequency
range of Band III is scanned by the Auto Scan
function (see page 35).
Band III (11B–12D)
UK:
(default)
Band III (5A–13F)
All Band 3: