Displaying Fm/ Am Radio Information; Receiving Rds; Listening To Dab Digital Radio (Cr-545Ukd) - Onkyo CR-545 Instruction Manual

Listening to the Radio—Continued

Displaying FM/ AM Radio Information

Press the remote controller's [DISPLAY] button
repeatedly to display more radio information.
FM / AM Frequency
1
Preset name *
1
* If the selected preset has no name, "No Name"
appears briefly and then the frequency is
displayed. See "Naming Presets" on page 39.

Receiving RDS

Press the [DISPLAY] button repeatedly to display the
following RDS information.
Frequency and preset number
Preset name*
Program Service Name
Radio Text (if available)
RDS is only for the areas where RDS broadcasts are
available.
What is RDS?
RDS stands for Radio Data System and is a method
of transmitting data in FM radio signals. It was
developed within the European Broadcasting Union
(EBU) and many European FM radio stations use it
these days. The CD receiver supports and displays
the Program Service Name (PS) and Radio Text (RT)
types of RDS data. The RDS indicator appears on the
display when the CD receiver is tuned to an FM
station that supports RDS.
Notes:
• If the signal from an RDS station is weak, RDS
data may be displayed intermittently or not at all.
• The message "Waiting..." may appear while the
*
Listening to DAB Digital Radio
(CR-545UKD)
2
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Scan
function automatically scans the DAB Band III for
the multiplexes (i.e., stations) available in your area.
Once the scanning process is complete, the first
station that was detected is selected.
Using the Auto Scan Function Manually
If a new DAB station is introduced, or you move to a
new area, you can run the Auto Scan function again.
1
2
3
The number of stations found and the scanning
progress are shown on the display.
RT data is being received.
2
If the selected preset has no name, it will be
skipped and the next Program Service Name will
be displayed.
Press the [TUNER] button repeatedly
to select "DAB".
DAB indicator
Station name
On the front panel, press the [INPUT] button
repeatedly to select "DAB".
Press the [MENU / CLEAR] button.
After appearing "Auto Scan?", press [ENTER].
Use the [ ] / [ ] buttons to select "UK"
or "All Band 3" (see "Auto Scan?" on page 36),
and then press [ENTER] to start the Auto Scan
function.
35