T H E F O O D S AV E R U S E R M A N U A L
Troubleshooting
The FoodSaver Designer Canister Will Not Vacuum:
Make sure the rubber gasket on the lid is free from food
1
materials, crumbs, etc.
Make sure the rim of the canister does not have any cracks or
2
scratches. Any gaps can prevent the a vacuum from forming.
Make sure you aren't filling the canister too full prior to
3
vacuum packaging. Always leave at least one inch (1")
between the contents and the lid.
The FoodSaver Universal Lid, Bulk Storage Canister, Square
Canister Will Not Vacuum:
When using the Universal Lid, make sure that the rim of the
1
container is smooth and flat. Ragged edges will prevent the
Universal Lid from forming a vacuum.
Make sure the rubber gaskets underneath the lids and the rim of
2
the canisters are free from food materials, crumbs, etc.
Make sure the knob on the lid is closing and opening properly
3
and that there are no food materials caught inside.
34
T H E F O O D S AV E R U S E R M A N U A L
The FoodSaver Bottle Stopper Will Not Vacuum:
Make sure the Bottle Stopper is fitting snugly inside the bottle.
1
If it is loose, air may leak in and prevent a vacuum from forming.
Make sure the neck of the bottle and tip of the Accessory Hose
2
are free from food materials, crumbs, etc. Any gaps will prevent a
vacuum from forming.
If You Cannot Fix the Problem:
Call our Consumer Services Department at the number listed at
the back of this manual.
NOTE: For all accessories, make sure that the Accessory
Hose is completely inserted into the machine and the lid of
the accessory.
35