Onkyo BD-SP808 Instruction Manual page 53

3-a) Use [K / L] to select "Proxy Address", then press
[ENTER]. Proxy address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
Others
Proxy Address
Clear
[K / L / s / B] : Move the highlight.
[the Number buttons] : Enter number.
[ENTER] : Enter the highlighted number/word.
[A] : Clear the entered number or word.
[B] : Clear all the entered numbers or words.
[C] : Switch between abc ? ABC ? @!?
[D] : Set the entered number or word.
3-b) After you enter proxy address correctly, press [D].
• Confirmation message will appear. Select "Yes" to
complete the settings.
Others
Proxy Address
Is Setting OK?
xxxxx
No
Yes
3-c) Use [K / L] to select "Proxy Port", then press
[ENTER]. Proxy port setting screen will appear. Enter
proxy port number with number buttons.
Others
Proxy Port
Please select the input Proxy Port.
then press 'ENTER'.
xxxxx
3-d) After you enter proxy port correctly, press [ENTER].
4
Press [RETURN] to go back to the previous screen, or
press [SETUP] to exit.
EN
FUNCTION SETUP
All Clear OK
Note
• The range of input numbers for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked
and not be able to use depending on your network
environment.
• Connection Speed
You can set connection speed as your preference. (The
default setting is "Auto".)
1
Follow steps 1 to 4 in "Connection Test" on page 51.
2
Use [K / L] to select "Enable(Custom)", then press
[ENTER].
3
Use [K / L] to select "Connection Speed", then press
[ENTER].
4
Use [K / L] to select the desired setting, then press
[ENTER].
"Auto":
Set the appropriate connection speed automatically, in
accordance with your network environment.
"10BASE Half":
Set the connection speed to "10BASE Half".
"10BASE Full":
Set the connection speed to "10BASE Full".
"100BASE Half":
Set the connection speed to "100BASE Half".
"100BASE Full":
Set the connection speed to "100BASE Full".
5
Press [RETURN] to go back to the previous screen, or
press [SETUP] to exit.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
• BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is "Allow".)
1
Follow steps 1 to 4 in "Connection Test" on page 51.
2
Use [K / L] to select "Enable(Custom)", then press
[ENTER].
3
Use [K / L] to select "BD-Live Setting", then press
[ENTER].
4
Use [K / L] to select the desired setting, then press
[ENTER].
"Allow":
Internet access is permitted from all BD-Live contents.
"Limited Allow":
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
"Prohibit":
Internet access is prohibited from all BD-Live contents.
5
Press [RETURN] to go back to the previous screen, or
press [SETUP] to exit.
53