Connection To An Audio System - Onkyo BD-SP808 Instruction Manual

Connection to an Audio System

• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2-Channel Analogue Audio Connection
audio
this unit
Digital Audio Connection
audio
this unit
Supplied cables used in these connections are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Note for Digital Audio Optical Cable
• Digital audio optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
EN
CONNECTIONS
stereo system
analogue audio input jacks
RCA audio cable
AUDIO OUTPUT (ANALOG)
AV receiver / amplifier
digital audio
optical input jack
digital audio
optical cable
AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)
AUDIO IN
R L
IR
IN
DIGITAL AUDIO INPUT DIGITAL AUDIO INPUT
OPTICAL COAXIAL
digital audio
coaxial input jack
or
digital audio
coaxial cable
IR
IN
RS232
17