Lock Setup - Onkyo TX-SR578 Instruction Manual

Note
• When set to "On" and close the menu, the name of connected
-compatible components and "RIHD On" are dis-
played on the AV receiver.
"Search..." → "(name)" → "RIHD On"
When the AV receiver cannot receive the name of the compo-
nent, it is displayed as "Player
the number of two or more component).
When set to "Off" and close the menu, "RIHD Off" are dis-
played on the AV receiver.
"Disconnect" → "RIHD Off"
• When an -compatible component is connected to the
AV receiver via the HDMI cable, the name of the connected
component is displayed on the AV receiver display. For example,
while you are watching TV broadcasting, if you operate a
Blu-ray Disc/DVD player (being powered on) by the remote
control of the AV receiver, the name of the Blu-ray Disc/DVD
player is displayed on the AV receiver.
" "
• Set to Off when a connected piece of equipment is not com-
patible or it is unclear whether the equipment is compatible or
not.
• If movement is unnatural when set to
to " Off " .
• Refer to the connected component's instruction manual for
details.
■
Audio Return Channel
Off:
Select "Off" if you don't want to use audio return
channel (ARC) function.
Auto:
The audio signal from your TV tuner can be sent to
the HDMI OUT of the AV receiver.
Audio return channel (ARC) function enables an HDMI
1.4 capable TV to send the audio stream to the HDMI
OUT of the AV receiver. To use this function, you must
select the TV/CD input selector and your TV must support
ARC function.
Note
• The "Audio Return Channel" setting can be set only when the
"HDMI Control" setting is set to "On".
• This setting is set to "Auto" automatically when the "HDMI
Control" is set to "On" first time.
■
Power Control
Off:
Power Control disabled.
On:
Power Control enabled.
To link the power functions of
ponents connected via HDMI, select "On".
This setting is set to "On" automatically when the
"HDMI Control" is set to "On" first time.
En
46
* * *
" or "Recorder ", etc (" " means
" "
On , change the setting
-compatible com-
Note
"Power Control"
• The setting can be set only when the
"
Control setting is set to "On".
• HDMI power control only works with
components that support it and may not work properly with
some components due to their settings or compatibility.
• When set to "On", power consumption will increase.
• When set to "On", regardless of whether the AV receiver is On
or in Standby, both audio and video stream from an HDMI input
will be output to the TV or other components via HDMI connec-
tion (HDMI pass through function). When the HDMI pass
through function activates in standby mode, HDMI THRU indi-
cator will light.
• The power consumption during standby mode will increase dur-
ing the HDMI pass through function; however in the following
cases, the power consumption can be saved:
1. The TV is in standby mode.
2. You are watching a TV program.
• Refer to the connected component's instruction manual for
details.
■
TV Control
Off:
TV Control disabled.
On:
TV Control enabled.
Set to "On" when you want to control the AV receiver
from an -compatible TV that is connected to
HDMI.
Note
• Do not assign the component connected with the HDMI input to
the TV/CD selector when you set "TV Control" setting to "On".
Otherwise, appropriate CEC (Consumer Electronics Control)
operation is not guaranteed.
• Set to " Off " when the TV is not compatible or when it is unclear
whether the TV is compatible or not.
• The "TV Control" setting can be set only when the
" 45) and "Power Control"
Control (➔
"On".
• Refer to the connected component's instruction manual for
details.
After changing the settings of the
"Audio Return Channel" ,
, turn off the power to all connected pieces of
Control"
equipment and then turn them on again. Refer to the
user's manuals for all connected pieces of equipment.

Lock Setup

With this preference, you can protect your settings by
locking the setup menus.
Main menu Lock Setup
■
Setup
Locked:
Setup menus locked.
Unlocked:
Setup menus not locked.
When the setup menus are locked, you cannot change any
setting.
"
HDMI
-compatible
" HDMI
settings are both set to
HDMI Control ,
" "
"Power Control" , or "TV