Horizontal Percentage Fill - Omron CX-Supervisor User Manual

Runtime Actions

9-3-10 Horizontal Percentage Fill

138
The boundaries in which the object moves are inserted into the Active
Expression Range/Required Height: fields. The Maximum Height specifies the
required height in pixels of the object when the result of the expression
reaches the Maximum Value. The Minimum Height specifies the required
height in pixels of the object when the result of the expression reaches the
Minimum Value. A value within the maximum and minimum values results in a
proportionate height between the minimum and maximum heights The
resizing also requires an anchor and direction in which to stretch or shrink.
This can be specified as the top of the object, bottom of the object or centrally
to the object, by selecting the appropriate Justification: setting.
To abort the Resize Height definition, click the Cancel button. By clicking the
Browse button, a point may be directly specified, as described in chapter 9,
Runtime Actions. When completed, click the OK button. If invalid data has
been inserted into any field, a descriptive error message opens.
Closed objects can be flood-filled along a horizontal axis. This can be
specified via the Percentage Fill (Horizontal) dialog box.
To access the Percentage Fill (Horizontal) dialog box to add an action, select
Percentage Fill (Horizontal) from the animation list and click the Add Action
button. To access the Percentage Fill (Horizontal) dialog box to modify an
action, select Percentage Fill (Horizontal) from the animation list and click the
Modify Action button. Refer to chapter 9, Objects, for a list of the objects to
which this action is applicable.
On selection of the Percentage Fill (Horizontal) action, the Percentage Fill
(Horizontal) dialog box opens:
To define the animation, an expression consisting of a number of operators
and operands (which may be based on the status of a point) must be entered
in the Expression: field.
The boundaries associated with the percentage fill are inserted into the Active
Expression Range/Required Percentage Fill: fields. The % Filled fields specify
the percentage of the object to fill when the expression reaches its maximum
and minimum values. The flood-fill also requires a direction. This can be
specified as left to right or right to left, by selecting the appropriate Fill
Direction: setting.
To abort the Horizontal Percentage Fill definition, click the Cancel button. By
clicking the Browse button, a point may be directly specified, as described in
chapter 9, Runtime Actions. When completed, click the OK button. If invalid
data has been inserted into any field, a descriptive error message opens.
SECTION 9 Animation