Transferring Images To Your Computer Without Using Olympus Master - Olympus Camedia AZ-2 ZOOM Advanced Manual

Transferring images to your computer without using OLYMPUS Master

Your camera supports the USB Mass Storage Class. You can transfer images to a
computer by connecting the camera to the computer with the provided USB cable.
This can be done even without using OLYMPUS Master.
The following operating systems are compatible with the USB connection
Windows : Windows 98/98SE/Me/2000 Professional/XP
Macintosh : Mac OS 9.0-9.2/X
● Users running Windows 98 need to install the USB driver. Before connecting
the camera to your computer with the USB cable, double-click the file
included in the following folder on the provided OLYMPUS Master CD-ROM.
When you install OLYMPUS Master on a computer running Windows 98SE,
the USB driver will be installed at the same time.
Your computer's drive name: \USB\INSTALL.EXE
● Even if your computer has a USB connector, data transfer may not function
correctly if you are using one of the operating systems listed below or if you
have an add-on USB connector (extension card, etc.).
– Windows 95/NT 4.0
– Windows 98/98SE upgrade from Windows 95
– Mac OS 8.6 or lower
(except Mac OS 8.6 equipped with USB MASS Storage Support 1.3.5
installed at the factory)
– Data transfer is not guaranteed on a home-built PC system or PCs with no
factory installed OS.
Note
:
8
147