Advertisement
QS.1505_GSpro_v3
6/29/04
Additional Features
Pulse Mode
Pulse Mode allows you maximum control over the
vacuum process for crushable items in bags. The
Pulse feature operates similar to the Pulse button on
a blender. After placing bag in Vacuum Channel
and closing lid, follow these instructions:
Set Seal Control Switch
1.
Press down firmly on lid to activate motor, then
2.
release.
Press Pulse Button
3.
desired, then release. Indicator Light
quickly after Pulse Button is used. To remove
more air, simply repeat Step 3.
Instant Seal
The Instant Seal Button
early and seals the bag, preventing fragile foods such
as cookies from being crushed.
Vacuum package as described in previous sections.
1.
To stop process before all air is removed, press and
2.
release Instant Seal Button. Vacuum process will
stop within a few seconds and bag will be sealed.
Seal Only
If you want to seal a bag without vacuuming, use the
position on the Seal Control Switch
Seal Only
You can even reseal non-FoodSaver bags such as
Mylar
®
potato chip bags.
Place open end of bag on Sealing Strip
1.
close lid.
Set Seal Control Switch to
2.
Press down firmly on lid with both hands until
3.
motor starts, then release. Motor and Indicator
Light
will turn on, indicating bag is sealing.
(F)
11:13 AM
Page 4
(K)
to
.
(E)
Pulse Mode
and hold for as long as
(G)
will flash
(F)
stops the vacuum process
(D)
.
(E)
and
(N)
.
Seal Only
After removing desired amount of air, press
4.
Instant Seal Button
to seal bag. Indicator Light
(D)
will flash slowly when bag is sealing.
When motor and light turn off, vacuum process
5.
is complete.
When using Pulse Mode, you must press Instant
Tip:
Seal Button to seal bag. If there is no activity for 30
seconds, appliance will shut off automatically and
bag will not be sealed.
When motor and Indicator Light
3.
open lid and remove bag.
The Instant Seal Button is also used to end Pulse
Mode (see instructions above).
When motor and Indicator Light turn off, open lid
4.
and remove bag.
If Sealing Strip is too hot for a non-FoodSaver
Note:
bag, try setting Seal Control Switch to
. As long as you place open end of bag on
Seal Only
Sealing Strip (not in Vacuum Channel), no air will be
removed.
turn off,
(F)
instead of
1
Advertisement
